Air Compressor

Why is it important to put a few drops of oil in the nail gun prior to use?
1. Make the nails shoot out faster
2. Lubricate the internal moving parts
3. The air flow moves more easily
Why should the air release valve be opened and drained prior to storing the compressor tank
1. Make it lighter to carry
2. To ensure the compressor motor keeps running
3. To avoid the build up of condensation
Are you require to wear safety glasses while using the air nailer?
1. Yes
2. No
What is the purpose of the depth adjustment dial on the compressor
1. To set the nail depth
2. To use only the right amount of air
3. To set the nails either below the surface of the wood or slightly above
What is the proper porcedure when hooking up the compressor to the air nailer
1. Hook air hose to compressor, then to air nailer, close air release valve then turn on the compressor
2. Turn on compressor, hook up hose to compressor and air nailer and leave the air release valve open
3. Hook it up in any order after the compressor is running.